Projects
Some recent projects that I’ve been working on to give you a feel for what is going on. There is a lot more and I will add more projects along the way. Sometimes an item will come up for sale. Come back regularly and don’t miss out on the vintage equipment available.
20/11/2020 13:41
Warm Audio WA-EQP
Busy with a customer’s Pultec clone: Warm Audio WA-EQP passive equalizer with a tube driver circuit. This unit w威而鋼 as defective and had some minor issues when it came in. On the customers demand..
27/09/2020 20:14
QUAD II
Investigating a complete QuadII set of a customer, with preamp and tuner included. There are some components which need to be replaced. As you can see on the scope, one of the two smoothing..
27/07/2020 16:22
Maintenance of a 1971 Cadac G series large format console
Musicality sometimes lies deeply embedded in inductor cores and capacitor magic. It was a pleasure to help with solving electronic problems in a legendary Cadac G series mixing console. This beast (yes, a real..
30/06/2020 18:16
Se Electronics T2 condenser microphone repair
Today a condenser microphone found its way to my bench for repairs. It had a nasty intermittent problem which occurred so now and then with a drop-out of signal whilst adding noise. I opened..
22/05/2020 16:19
Sansui SA-717
The initial problems were sound cut-off at the amplified speaker terminals when loading the amplifier and scratchy potentiometers/s必利勁 witches. After first inspection I found several suspects which could be the source of the problems…